Extension Tank

[Cavity]

This is the correct link.

https://www.google.com/imgres?imgur...HXAhXIv1QKHUFPAccQMwiZASgzMDM&iact=mrc&uact=8

 

[Frankenstein]

Is it the color red or am I having a difficulty in translation?

 

[KCvale]

What option would you recommend to add extra tank ?

What bicycle is this?
You should have plenty of room in the center cavity for a can, just need to see the bike.

 

[5-7HEAVEN]

I have Honda GX35 with the Staton friction drive mount. The tank is way to small and I need to carry more gas. What option would you recommend to add extra tank ? I've seen add-on tank at Staton site but it is not big and super ugly. I also saw some tanks on Amazon and BikeBerry, but by looking at pics it is hard to see how they are mounted or if they would work.


here are few more:

https://www.amazon.com/ScooterX-Sco...coding=UTF8&psc=1&refRID=S69Q5D02VJTSX76K6K6V

https://www.amazon.com/49cc-50cc-11...=1508481079&sr=8-16&keywords=bicycle+gas+tank

https://www.amazon.com/ScooterX-Ele...=1508481107&sr=8-24&keywords=bicycle+gas+tank

I remove my engines' saddle tanks and hook up to the 4-liter peanut tank.

https://www.ebay.com/itm/Motorized-...ash=item43f7eb612e:g:zSwAAOSwUEVYDzBs&vxp=mtr

 

[floridaboy]

Here is a tank i use it holds 2 liters.

https://www.ebay.com/sch/i.html?_fr...ESERVE+PLASTIC+FUEL+CAN+BOTTLE+2LTR+&_sacat=0

 

[rwquiring]

been using this set up for a couple of months and so far it has been great.

 

[Midwest Rider]

been using this set up for a couple of months and so far it has been great.
View attachment 83985

So describe how you did it ? How it operates ? Looks doable from one of my similar questions awhile back is said to plumb directly and remove the saddle tank. Simple enough, except I believe you need to be below or level with the carb. Not above it. ( citation needed here from an expert ). Clean looking job though rwq

 

[rwquiring]

So describe how you did it ? How it operates ? Looks doable from one of my similar questions awhile back is said to plumb directly and remove the saddle tank. Simple enough, except I believe you need to be below or level with the carb. Not above it. ( citation needed here from an expert ). Clean looking job though rwq

Hey Midwest, I basically plumbed it directly into the lower tank, I was not sure if the gas would keep on flowing, so when I run out of fuel in the lower tank I just open the petcock and fill it up. The mount for the tank was just a cheap Walmart seat post rack and it has worked out great, I did cut it down in length by about 2 inches. As of this morning I have 1660 on the clock and is still chugging along at right around 150 mpg, can't complain about that kind of mileage.