dotcom
Member
Does this mean there is an air leak b/c I checked and have all bolts tightened?
Its a new motor from boygofast on the 2nd tank of gas. At first it was riding very strong from the take off and even good on straight aways but then a cylinder bolt/stud broke as I was tightening it and I removed the cylinder to remove the broken cylinder stud/bolt and when I put it all back together with the new stud and new exhaust gasket that I made, it was not the same at all. Now its does not take off 1/2 as strong as before or pull up to speed as normally like it use to. I have tried removing the cylinder again and again and checking for air leaks but im at a standstill with it after thinking ive tried everything. Need ideas please
Its a new motor from boygofast on the 2nd tank of gas. At first it was riding very strong from the take off and even good on straight aways but then a cylinder bolt/stud broke as I was tightening it and I removed the cylinder to remove the broken cylinder stud/bolt and when I put it all back together with the new stud and new exhaust gasket that I made, it was not the same at all. Now its does not take off 1/2 as strong as before or pull up to speed as normally like it use to. I have tried removing the cylinder again and again and checking for air leaks but im at a standstill with it after thinking ive tried everything. Need ideas please