crassius
Well-Known Member
- Local time
- 8:32 PM
- Joined
- Jul 23, 2012
- Messages
- 4,550
Im having the same problem i replaced the cylinder but when i torque the head down the motor wont turn in a certain spot i think the piston is hitting the head. Can i run double head gaskets or do i need another cylinder.
could be that you have a 40mm stroke which often uses two base gaskets to get clearance at the top - undo head and hold it down with your hand while turning motor - you should be able to tell if one extra gasket will fix it (note: base gaskets come as either thick or thin & 40mm needs two thick ones)