Chopper 4 stroke build. Brakes?

[bioboi]

So this what it looks like! Two of them were overlapping so I used one its almost centered so I say success. Fits very snug doesn't mive!

 

[GW's Motorized]

So this what it looks like! Two of them were overlapping so I used one its almost centered so I say success. Fits very snug doesn't mive!

Make sure to check that before every ride. To mee that looks like it could slip really easily. I would put one on the other side and run a piece of aluminum across to give it more stability

 

[Wrench]

Modify the clamps so you can use two

Basically cut the clamps so the ends butt together in the center Then drill and attach a flat bar across the front
Then drill Center for the brake

 

[DieselTech]

So this what it looks like! Two of them were overlapping so I used one its almost centered so I say success. Fits very snug doesn't mive!

You need to get 2 clamps on that brake caliper. 1 is not safe at all. You are going to have a bad day if that clamps twist on you.

Like destroy the front wheel & you going over the handle bars. Bad day.