Buckling bar?

[BigRigReaper]

Hello, I was wondering if s buckling bar would be more durable made of stainless, magnesium or titanium? Can I purchase this or would I have to forge one? I find the steel one is inadequate.

 

[Spare_Parts]

5/16 or 8mm drill bit cut to size works.

 

[BigRigReaper]

That's good to know. Now how long is the length of the buckling bar factory new?

 

[Spare_Parts]

Depends on the engine. Just copy yours if you can.

 

[BigRigReaper]

Well mine is so short I can't disengage the engine anymore I might just buy one first 1$ at motorized bicycle. I got 66cc gt5a

 

[extremeodd]

If you have something like Ace hardware nearby check out their bolts section. They have a drawer with random metal dowels, bring in your bucking bar and find the dowel that's about 1/4in longer than yours. It'll be noticeably thinner but it'll work without issue. Not sure on the longevity as I literally just installed mine today but for the first time my clutch works how it should. It doesn't randomly have internal jams where it gets stuck disengaged, I can finally have it set so it's tight enough to not slip at peak power and still fully disengage when I stop. It's literally a game-changer. If it is a hair too long, just grind it down a little.

 

[BigRigReaper]

Right o, thanks for the suggestions on this issues fellas.

 

[BigRigReaper]

5/16 or 8mm drill bit cut to size works.

Perfect thank you cut one down to 28mm supposed to be 27mm but I want to try 28mm first.