Performance cylinder kit

[mony0_3]

https://www.aliexpress.us/item/3256...utparam-url=scene:pcJustForYouTop|query_from: Has anyone tried this kit from AliExpress?

 

[Sidewinder Jerry]

https://www.aliexpress.us/item/3256806557592424.html?spm=a2g0o.home.pcJustForYouTop.2.468a76dbATymYS&gps-id=pcJustForYouTop&scm=1007.13562.333647.0&scm_id=1007.13562.333647.0&scm-url=1007.13562.333647.0&pvid=a62f0ecf-d1cd-432f-af89-29ccdaf191ba&_t=gps-idcJustForYouTop,scm-url:1007.13562.333647.0,pvid:a62f0ecf-d1cd-432f-af89-29ccdaf191ba,tpp_buckets:668#2846#8114#1999&pdp_npi=4@dis!USD!29.80!27.42!!!29.80!27.42!@2101dee017117358498685993eef0e!12000038161971944!rec!US!136921228!&utparam-url=scenecJustForYouTop|query_from: Has anyone tried this kit from AliExpress?

If it sounds too good to be true then there's a 99% chance it's too good to be true.

 

[GW's Motorized]

You pay more for shipping than the actual jug lol

 

[Chainlube]

You pay more for shipping than the actual jug lol

When you look at those transfer, you'll see it's totally worth it.

 

[mony0_3]

I figured it was one of them "get what you pay for"!

 

[ImpulseRocket]

looks like a knock off Minarelli kit... There is a level of irony there I just can't get past lol.

 

[Nickt919]

I started with a similar knock Minarelli kit from Aliexpress.
Bought 2.. still have one new in the box.
The piston ejected one of the ring locator pins after about 600 miles.
Wasn’t willing to try the second kit.

The ports needed filing and when I drilled the cylinder holes from 6 to 8 mm I had to hold back on the drill press. The first hole shot through with just the weight of the chuck and bit. They’re cast iron but soft cast iron.
It ran very hot…in the 275*-310*F range. Could have been the CDH head I was using.
All that said…it did run well when it ran.

 

[Nickt919]

If you get all in the ad it’s not a bad deal. I paid $100+ just for my 10mm cylinder spacer and intake plate.