dchevygod
Member
- Local time
- 10:40 AM
- Joined
- Mar 7, 2011
- Messages
- 473
I got this kit on ebay with a china **** gx31 clone. The clutchbell was warped snapping my spindle, fixed the spindle and snapped my crankshaft all before the second tank of fuel was gone! The engine is trash except for maybe parts and im left with this flawed mount. The issue is the bearing on the clutchbell side is moving inside the mount. Im going to remove that bearing, trim away some material on the mount make some spacers for the housing and shorten, lathe and add some setscrews to the spindle so I can use the double bearing clutchbell housing that comes on a chung yang 460. Im gonna get a goped 1.5L tank mounted opposite of the motor on the rack mount. After initial install im going to have a cool guy I met on gopednation "Cablescum" port the topend, though I don't want to mod the exhaust so its still legal and isn't too terribly loud. This engine is rated at 4.2 hp stock so with porting and a hp air filter im guessing 4.5+ hp. With the gx31 my bike only did 21mph with the 1" spindle! Im guessing probably more like 40-42mph with the 460