D
Deleted member 35519
Guest
First measure the outer diameter of the crank shaft rod in millimeters. Find a high grade 8 steel automotive bushing (washers) to fit as outer diameter of the crankshaft rods and the bushings diameter screwed on both ends to retain your Clutch spring. I couldn't find anything wide enough at my local hardware store. So I used a carbide bit to widen the inner diameter of the bushing washer. Everything else hardware store had was too was too large of an outer diameter for the washers.
I recommend using drill press instead. If you dont have one be a neanderthal like me.
Use propane and conventional oil to heat red hot and dip the washer/bushing in oil to cool down and strengthen the steal even more. I repeated this process 5 time each washer. Voila.
Now you have more grip on your clutch spring.
I highly recommend using an aftermarket clutch plate thereafter. This will give you your out of the box stock dlh clutch performance.
I recommend using drill press instead. If you dont have one be a neanderthal like me.
Use propane and conventional oil to heat red hot and dip the washer/bushing in oil to cool down and strengthen the steal even more. I repeated this process 5 time each washer. Voila.
Now you have more grip on your clutch spring.
I highly recommend using an aftermarket clutch plate thereafter. This will give you your out of the box stock dlh clutch performance.
Attachments
-
IMG_20240227_204001799.jpg213.8 KB · Views: 42
-
IMG_20240227_200432365.jpg148.2 KB · Views: 37
-
IMG_20240227_204133415.jpg169.4 KB · Views: 35
-
IMG_20240227_204007753_HDR.jpg112.1 KB · Views: 36
-
IMG_20240227_204344937.jpg160.6 KB · Views: 39
-
IMG_20240227_204315502_HDR.jpg96 KB · Views: 37
-
IMG_20240227_204854480.jpg108.7 KB · Views: 33
-
IMG_20240227_204347370_HDR.jpg134.6 KB · Views: 39
-
IMG_20240227_205005575_HDR.jpg111.1 KB · Views: 35
-
IMG_20240227_204902877.jpg128.4 KB · Views: 38
-
IMG_20240227_205338225.jpg146 KB · Views: 36
-
IMG_20240227_210154502_HDR.jpg97.5 KB · Views: 36
-
IMG_20240227_205843239_HDR.jpg159.1 KB · Views: 39