rawly old
Active Member
- Local time
- 11:26 PM
- Joined
- Feb 27, 2011
- Messages
- 606
Here's a pic of the mockup. It's the same as the finished version except
the rope i used as a belt is looped thru the frame in the pic.(DUH!)
In the final setup the belt goes behind the brake caliper with 3/16"
clearance on both sides. That ain't much, but it's enuff.
the rope i used as a belt is looped thru the frame in the pic.(DUH!)
In the final setup the belt goes behind the brake caliper with 3/16"
clearance on both sides. That ain't much, but it's enuff.