WillitBoost
Well-Known Member
For anyone with access to a 3d printer, find attached all the files you'll need for a DIY degree wheel designed for a China doll bottom end.
For best accuracy resin print the adaptor. Adhere the print out to a CD or DVD disc. Press the disk onto the adaptor (CD/DVD ID is 15.00mm, flange is 15.15mm, tapered to 14.95 up top). Use a 12mm socket to turn the adaptor if needed, but for best accuracy, rotate the opposite side of the engine. The CD/DVD can be rotated with the adaptor held fixed to set TDC.
For best accuracy resin print the adaptor. Adhere the print out to a CD or DVD disc. Press the disk onto the adaptor (CD/DVD ID is 15.00mm, flange is 15.15mm, tapered to 14.95 up top). Use a 12mm socket to turn the adaptor if needed, but for best accuracy, rotate the opposite side of the engine. The CD/DVD can be rotated with the adaptor held fixed to set TDC.