Amazing!! Got My Bearings From China In Three Days!

  • Thread starter Deleted Member 4613
  • Start date
D

Deleted Member 4613

Guest
Received my MR2015 bearings from China ten days after ordering. Three
days shipping by FedEx International Prioirity Mail. I inspected them and
they are right on target. My problem now is to choose the right dry
lubricant and apply it. I'm considering a graphite product and
a PTFE dry lube applied through the supplied micro tube. I will
show pics of the bearings next to the larger 15x21x4 mm. The
new ones are 15x20x3.5mm.

I'm favoring a dry PTFE chain lube like this one:
www.homedepot.com

WD-40 SPECIALIST 4 oz. Bike Dry Chain Lube, High-Performance Lubricant for Dry & Dusty Conditions 39001 - The Home Depot

WD-40 Specialist Bike Dry Chain Lube is a high-performance lubricant specifically formulated for dry and dusty conditions. Polymers in the Dry Lube formula quickly form a dry film to protect the chain
www.homedepot.com
 
I'm looking for high temp resistance so PTFE is a better choice
than silicone, though both would probably work.. This looks like a
good silicone dry lube:
www.homedepot.com

3-IN-ONE 4 oz. All-Temp Silicone Drip Oil, Long-Lasting Lubricant 120008 - The Home Depot

Get projects done, and done right. 3-IN-ONE provides solutions for all sorts of home and equipment maintenance projects. In fact, for over 100 years 3-IN-ONE has been helping people solve problems and
www.homedepot.com
 
s-l1600.jpg
 
Well, I researched a little more on silicone dry lubricants and found that
the 3 & 1 Lube contains about 5% silicone and the Blaster Silicone Spray lube
has 15% silicone in it. Found this info from the Materials Safety Data Sheets.
A Dot 5 silicone brake fluid contains about 90% silicone. I will use the
Blaster product and apply it with the supplied straw. That's it.
 
Back
Top