So u r saying the size of the clutch is different on each? What part of it is the shoe and bell?The diameter of the shoes should be 76mm and the bell is 78mm its a common size that many weed wackers use here is what a tapered shaft with clutch attached looks like picture is from @GodMan
HS uses 76mm u say, but how does that illustrate the difference between the straight vs tapered?There are different sizes of clutch 25cc motors like the gx25 use a 54mm clutch. HS uses 76mm. The shoes look like drum brake shoes with springs and the bell looks like a stamped piece of metal that carries power from the shoes into the transmission.
Tapered is the shortest shaft they make and you have to take the clutch off to see itHS uses 76mm u say, but how does that illustrate the difference between the straight vs tapered?
I too have a Honda GXH 50 engine. The Huasheng 142 is a really cheap Chinese copy. The Honda has better quality metals in it and no plastic camshaft gear.Getmotorized.ca actually says 1.88hp and gasbike says 2.5hp I highly doubt it's 1.6hp do you mean the subaru or a gx35? I know for sure the huasheng has more hp than a 35cc. I got 28mph out of the subaru and 34-35 out of a 142f clone before we start talking about gear ratios and top speeds let's compare the 142 to its parent engine the gxh50
1.6 kW ( 2.1 HP ) / 7000 rpm so maybe you really mean 1.6kw instead of horsepower. The gxh uses a mechanical instead of electronic governor but it's essentially the same engine. Anyone else want to chime in about these horsepower ratings? The gx50 is also rated at 2hp but it is 47.9 cc even smaller than the 49.4cc