Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Join Date
    Mar 2008
    Location
    South Mississippi
    Posts
    1,558
    Thanks
    0
    Thanked 4 Times in 1 Post

    Default Explain electric ignition to me...

    I think I have a magneto. Everybody told me when I wanted to wire in a toggle on-off switch (instead of the grounding out method), that I would need to splice the switch in between the magneto and CDI. I don't see a CDI... is that possible, or is it all built into one little box?



    The box has two wires that were originally for the momentary switch (to ground out), black & red... and there's also the spark plug wire. At the bottom is the magneto. All in one, right? The thing's glued up pretty nicely.

    Also... The plug connector is soo poor quality, so I was gonna try splicing a spare plug wire this guy gave me, and when I cut into it... I didn't find ANY wire. Just some rubber, fibers, & plastic. I really must be losing my marbles.
    I guess the best thing for me to do is try and find a Tanaka magneto/CDI, since this is supposedly a rip-off of the Tanaka 33cc.
    Quote Originally Posted by srdavo View Post
    Torque..... that's what pedals are for.
    "I'm not blocking traffic -- I AM traffic!"

    The Crash Course for Motored Bike N00Bs

    SuiJurisForum.com -- A Forum where Freemen uncover the "Secrets" of Law & Commerce

  2. #2
    Join Date
    Jul 2008
    Posts
    189
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    There really is nothing wrong with grounding (shorting) the magneto. It produces bugger-all current, and has a pretty high resistance. You would be dissipating the energy across a LOT of wire, it wouldn't even get warm.

    Spark plug wire used on these (as with most (all?)) engines is resistance wire to suppress EMF. It is carbon fibres + graphite IIRC. Apparently it unscrews from the CDI.

    A non-resistance wire will produce a hotter spark, but will basically swamp any am radio reciever (FM will be pretty bad) in a 15m radius. Not very sociable.

  3. #3
    Join Date
    Mar 2008
    Location
    South Mississippi
    Posts
    1,558
    Thanks
    0
    Thanked 4 Times in 1 Post

    Default

    Well, my bike came with stranded copper wire, and the plug wire from some guy's car had NO wire whatsoever! I couldn't understand that.

    Anyway, I'm guessing my magneto and CDI are both in this little black box, I couldn't just have a magneto, right?

    Hopefully just temporarily, I've put the magneto/CDI/plug wire from my old engine on, and it runs alright... BUTTT... it whistles now, like an alien ship floating right above/behind me. At least, I'm pretty sure that's what it is. I'll have to take the cover off again to take a closer looksy & listen.

    I shoulda just bought a Tanaka.
    Quote Originally Posted by srdavo View Post
    Torque..... that's what pedals are for.
    "I'm not blocking traffic -- I AM traffic!"

    The Crash Course for Motored Bike N00Bs

    SuiJurisForum.com -- A Forum where Freemen uncover the "Secrets" of Law & Commerce

  4. #4
    Join Date
    Jul 2008
    Posts
    189
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Magneto is inside the engine - there is a magnet on the flywheel/crankshaft, and the coil is fixed to the body of the engine. The black box is the CDI.

  5. #5
    Join Date
    Mar 2008
    Location
    South Mississippi
    Posts
    1,558
    Thanks
    0
    Thanked 4 Times in 1 Post

    Default

    Yea, my magneto & CDI are an all-in-one unit, I guess.

    I guess I should look into seeing if a genuine Tanaka replacement will actually fit this Tanaka knock-off.

    EDIT: wait a minute, are the magnets on the flywheel considered the magneto... or is the "pickup" magnet with the coil the magneto?? And is there even a capacitor in this "CDI", or are there just one or two coils?

    I also looked at the Tanaka replacement "coil, ignition", and it seems that one of the bolt holes is in a different place, so I'm stuck with dealing with FiveFlags. =-(
    Last edited by sparky; 09-25-2008 at 09:17 AM.
    Quote Originally Posted by srdavo View Post
    Torque..... that's what pedals are for.
    "I'm not blocking traffic -- I AM traffic!"

    The Crash Course for Motored Bike N00Bs

    SuiJurisForum.com -- A Forum where Freemen uncover the "Secrets" of Law & Commerce

  6. #6
    duivendyk Guest

    Default

    There are magnetos that directly fire a plug,without any CDI unit in fact it is incorrect to talk about a magneto with CDI.The original magnetos were originally developed by Robert Bosch in Germany and directly generate a spark.They had big horseshoe magnets on them hence the name "magneto".These magneto based systems were standard for many years.Later with batteries becoming more common,battery ignition gained a foothold (cost).Until about 20 years ago all magneto ignitions had breaker points (contacts).The spark discharge would be initiated when the points opened and the energy stored in the magneto HV coil is released in a high voltage pulse (actually a series of pulses) to fire the plug.More recent magneto systems use a solid state switch instead of the "points",but the principle of operation is the same.
    Capacitor discharge systems use the stored energy in a capacitor to fire the plug (via a pulse transfomer).They can generate very high voltage, but shorter duration, high energy ignition pulses that can fire even leaky plugs,but may not be as effective in firing the micture due to the short pulse duration.Most car ignitions still use coil discharge systems, which are just as effective.Sophisticated CDI systems are widely used for racing applications, they generate a series of high energy pulses for fast burning of the micture charge
    Last edited by duivendyk; 09-25-2008 at 02:32 PM. Reason: omission

  7. #7
    Join Date
    Nov 2010
    Location
    Brampton ON
    Posts
    277
    Thanks
    5
    Thanked 8 Times in 8 Posts

    Default

    I'm confused too... I researched electronic ignition and it seems to require a battery, but these engines dont have a battery...

  8. #8
    Join Date
    Jun 2011
    Location
    Indiana
    Posts
    12
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Hello,
    I might be able to help offer some assistance on how these systems work. I don't want to be real technical, but if you know a few things; these circuits are pretty simple.

    oh @Sparky, the squeak noise is a "leaking" HV cap in the CDI (black box) prolly should replace it.

    Okay onto the ignition system.

    -First you have the magneto (magnets on a rotor). With these systems it serves 2 purposes; Both timing and ignition energy. Timing is, of course, "where" they are placed in relation to the pistons' degree of cycle. Ignition energy comes from both the strength of the magnets (mainly) and the speed they are moving.

    -Second you have a coil (essentially a "pickup" like in car dizzy's) This receives the magnetic energy (Iron core) and transfers it to the CDI through the "primary" wires wrapped on the Iron core.

    -Third you have the CDI circuit. This "stores" the energy in capacitors (condensor in a car) and then transfers this energy BACK through your coil (in a different wire).

    -Fourth, the coil (secondary circuit) "steps up" or transforms the "stored" capacitor energy to High Voltage, this goes through the spark plug wire.


    That's basically the operation step by step. So, to directly answer the question "why no battery" the "juice" is coming from the magnets alone.

    A couple of other things that may be worthwhile to point out as well.

    Something key if your playing with timing in these systems. The HV spark "fires" just AFTER (ms) the magnet (s) pass the coil. I can explain more about this, but I don't imagine it's necessary. So the "trailing edge" of the magnets is closer to the firing point in time. Don't time off the front or middle.

    Ignition energy can be affected by Magnet strength and spacing to the "Iron" part of the Coil's core. With Magnet's too weak or spacing too far; not enough energy gets transferred and stored to create a HV spark.

    For Coils (in these low energy systems) they would probably fail slowly and you would get a weak spark. You could also test the wires if you can access them.

    For the CDI's they should be mostly a "go no go" situation as their parts usually fail catastrophically. You have the one exception with a leaky cap and a squeak.

    I think that covers it, lol. Sorry to be windy. Hope this helps
    Thanks

  9. #9
    Join Date
    Nov 2006
    Location
    Pittsburg, Ks.
    Posts
    5,483
    Thanks
    12
    Thanked 0 Times in 0 Posts

    Default

    Nice explanation.

    thanks
    Dave




  10. #10
    Join Date
    Mar 2008
    Location
    South Mississippi
    Posts
    1,558
    Thanks
    0
    Thanked 4 Times in 1 Post

    Default

    Wow... Didn't even know I had started such a thread YEARS ago.

    If I use a voltmeter to test the ignition coil, should I just take the spark plug out.... and put one wire on the ground (engine head) and one on the plug's inner electrode dealy??

    I shipped my two faulty ignition coils back to the dealer for him to test at the price of $6, not even thinking about harbor freight selling voltmeters for less than $10....
    Quote Originally Posted by srdavo View Post
    Torque..... that's what pedals are for.
    "I'm not blocking traffic -- I AM traffic!"

    The Crash Course for Motored Bike N00Bs

    SuiJurisForum.com -- A Forum where Freemen uncover the "Secrets" of Law & Commerce

Page 1 of 2 12 LastLast

Similar Threads

  1. Chinese engine, CDI ignition or what ??
    By duivendyk in forum 2-Stroke Motorized Bicycle Engines
    Replies: 7
    Last Post: 03-07-2011, 07:15 PM
  2. Whizzer ignition timing.
    By RdKryton in forum Whizzer Motorized Bicycles
    Replies: 24
    Last Post: 04-05-2009, 04:01 PM
  3. Ignition Problem ( CDI magneto )
    By Patch in forum 2-Stroke Motorized Bicycle Engines
    Replies: 2
    Last Post: 11-16-2008, 09:23 PM
  4. Advance ignition
    By Bikeuser in forum 4-Stroke Motorized Bicycle Engines
    Replies: 0
    Last Post: 08-20-2008, 01:43 AM
  5. CDI hop up ignition?
    By RedGreen in forum 2-Stroke Motorized Bicycle Engines
    Replies: 6
    Last Post: 04-10-2008, 01:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •