Media added by Lunardog

Navigation

  1. Motorized Bicycles 1K
  2. Engines & Diagrams 67
  3. Antique Motorized Bicycles 44
  4. Videos 13
  5. Electric Bicycles 1
  6. Forum Pictures 68K
Browse albums

Media comments

Media statistics

Categories
6
Albums
1,661
Uploaded media
82,391
Embedded media
13
Comments
3,871
Disk usage
13.5 GB
2012-08-14_15-38-50_687.jpg

2012-08-14_15-38-50_687.jpg

  • 0
  • 0
2012-08-14_15-32-40_275.jpg

2012-08-14_15-32-40_275.jpg

  • 0
  • 0
Solder point check.jpg

Solder point check.jpg

  • 0
  • 0
Mag mount side.jpg

Mag mount side.jpg

  • 0
  • 0
Mag gaps.jpg

Mag gaps.jpg

  • 0
  • 0
Overall constitutes about 40 hrs time in babrication and painting and I still have a couple hours left to 100% completion.

Overall constitutes about 40 hrs time in babrication and painting and I still have a couple hours left to 100% completion.

  • 0
  • 0
Gotta have a stripe er two on the tank just for the heck of it!

Gotta have a stripe er two on the tank just for the heck of it!

  • 0
  • 0
You can see here there was no room to raise the engine and is why the motor mounts had to be modded like they were. The carb is close to the seat tube

You can see here there was no room to raise the engine and is why the motor mounts had to be modded like they were. The carb is close to the seat tube

  • 0
  • 1
Longer tank straps after cleaning ,jb weld and paint.

Longer tank straps after cleaning ,jb weld and paint.

  • 0
  • 0
Standard auto parts store 2" muffler strap attached to the bottom of the kick stand worked well to secure the bottom of the muffler.

Standard auto parts store 2" muffler strap attached to the bottom of the kick stand worked well to secure the bottom of the muffler.

  • 0
  • 0
Made longer CDI mounts for wide tube.

Made longer CDI mounts for wide tube.

  • 0
  • 0
Front motor mount was a trick due to clearance issues with the top of the motor and carb. This was the end result. We will see how it holds up. All mo

Front motor mount was a trick due to clearance issues with the top of the motor and carb. This was the end result. We will see how it holds up. All mo

  • 0
  • 0
Had to cut the flange off the muffler and re-weld it to get a fit but it finally bolted up with a tiny bit of clearance on the frame.

Had to cut the flange off the muffler and re-weld it to get a fit but it finally bolted up with a tiny bit of clearance on the frame.

  • 0
  • 0
Carbon fibre wrapped the exhaust. Maybe it'll keep the heat down.

Carbon fibre wrapped the exhaust. Maybe it'll keep the heat down.

  • 0
  • 0
Added a little color to the motor to match the bike.

Added a little color to the motor to match the bike.

  • 0
  • 0
11357.jpg

11357.jpg

  • 0
  • 0
Almost done. Have a rear rack and a set of bags to put on but the main build is complete.

Almost done. Have a rear rack and a set of bags to put on but the main build is complete.

  • 0
  • 0
2012-04-17_15-57-08_984.jpg

2012-04-17_15-57-08_984.jpg

  • 0
  • 0
2012-04-17_15-55-30_999.jpg

2012-04-17_15-55-30_999.jpg

  • 0
  • 0
2012-04-17_15-54-48_629.jpg

2012-04-17_15-54-48_629.jpg

  • 0
  • 0
2012-04-17_15-53-59_955.jpg

2012-04-17_15-53-59_955.jpg

  • 0
  • 0
2012-04-17_15-53-15_749.jpg

2012-04-17_15-53-15_749.jpg

  • 0
  • 0
2012-04-17_15-52-45_265.jpg

2012-04-17_15-52-45_265.jpg

  • 0
  • 0
2012-04-17_15-52-32_242.jpg

2012-04-17_15-52-32_242.jpg

  • 0
  • 0
Back
Top