G2 REED VALVE problem

[Delta0413]

I bought a G2 reed valve. I drilled a hole in my piston. Everything is smooth, lower revs are lively. But he is drowning at full speed. When I give full throttle, the power drops. Can you help me.

+I used stock carburetor

I have OKO PWK in my inventory. But I didn't use.

 

[Chainlube]

What exhaust pipe are you using? Drop the clip down one notch on the needle.

 

[Chainlube]

How big was the hole?

 

[Wrench]

How big was the hole?

If you can put both hands in and clap the hole is too big

 

[Delta0413]

Düzelttim arkadaşlar. Jeti küçülttüm. Fazla benzinden dolayı motorum boğuluyordu.

Moderators Note:
In future, "English Please", when posting comments in this forum, Thank-you
I have provided the translation of this post from its original Turkish rendition.

"I fixed it guys. I made the jet smaller. My motor was flooding out due to too much gasoline."

 

[Delta0413]

I'm sorry I didn't notice