sprocket

  1. Degoragon

    Sprockets Sprocket spacer for tapered axle?

    So I bought a freewheel rear wheel for my Schwinn project. I also have a 38T sprocket with CNC hub adapter. However, I have noticed that it is a tapered hub, and it it is 0.68" at the center, and 1" at the ends. Any way to shim up the difference?
  2. L

    Cutting rag joint in half...?

    Hey Everyone, This is my first post on the forum. I'm working on my first build and finally finished it up but realized my chain alignment was really bad and creating this "popping" noise. The only way I can see to bring the drive sprocket and rear sprocket into alignment is to thin the outer...
  3. Jag

    Hub Clamp Sprocket and Pull Start help

    I have a hub clamp sprocket (and yes it’s the right size for my hub, and the 2 sides of the clamp only make contact to the center hub.) I can’t get it not to slip, max ive tightend it to is 26 ft lbs. I’ve tried cleaning both surfaces and putting X marks for more grip/surface area on the clamp...
  4. D

    Schwinn OCC Help

    Hi, I have a Schwinn Stingray OCC Chopper and I was wondering what size sprocket hub adapter to use for it. I don't have access to the bike at the moment and want to order the part soon so I have everything to put the bike together when I get back to my auto class. For anyone who is wondering I...
  5. lukecanna

    Sprockets Sprocket on disc brake rotor hub axle thing

    Hi, So on my most recent build the real wheel had a disc brake so once I took it off I was able to drill some holes through my sprocket and mount the sprocket directly to the old rotor hub. even used the old rotor mounting hardware, seemed alright this was much easier and I was 100% sure my...
  6. B

    Sprockets Top Hat Disc Hub Sprocket Adapter - Best Possible Offset?

    Hi all! First post. My first and current bike is a 90’s Specialized Rockhopper Comp with a dax F80 kit. I did a couple of stupid things that ultimately destroyed my rear wheel. I’d had an eye on these wheels for I while, and I ordered them this past weekend...
  7. B

    Maintenance questions, and air leak?

    Hey guys, first post so excuse me if this is in the wrong section. I'd say this engine has around 1000 or so km on it, and since day one I've had fuel/oil dripping onto the engine, not sure if it is from the spark plug, exhaust or crank case but I have made sure all is tight. The bike goes great...
  8. Sitherus

    Sprockets CNC Hub Adapter Between Sizes

    I used my calipers to measure my hub/axle the part between the spokes where the CNC adapter fits. It measured 1.273 inches or 32.35mm I cant find any hub adapters that fit. What size would be right for me? I need to use to 3 point adapter like this one.
  9. Will'smotobikes19

    Tips from what I've learned

    Hey guys just wanted to let anyone that needs some tips have some. * Don't use rag joint sprockets they always become untrue and are dangerous use the cnc adapters or hard mounted sprockets instead. * Don't skimp on China chain there is a company called Regina chain that makes #415 and it's...
  10. lukecanna

    Best sprocket to use on 29" bike

    Hi everyone, I have just put my motor on a 29" bike (already run in) and I would like to know it it is worth switching to a 36t for higher speeds. is it alright to do this with the bigger wheel or should I just keep the provided 44t
  11. M

    Chain rubbing cover

    Hey! I've been perusing these forums for the last month or two and finally got my first 66cc kit in the mail today so I figured I should finally join in. Anyway, upon mostly installing my kit(for the life of me can't find an Allen key to move my stupid twist shifters) and noticed the rear wheel...
  12. R

    Chain slips off rear sprocket

    I'm am desperate for some help here and need some advice. I have a 49cc 2 stroke bike motor attached to a 26 inch giant beach cruiser bike. Everything is hooked up ready to go but no matter what I do my chain continues to slip off the back sprocket. I bought a spring chain tensioner which helps...
  13. C

    Sprocket wear

    How to tell when drive sprocket needs replacing
  14. cmb271

    Nut size for 4g transmission rear sprocket

    Hey everyone, I'm in the process of rebuilding the 4g transmission for my 4 stroke after the bolt that held the 10t rear sprocket fell off causing a domino effect of transmission failure. I got another sprocket but I don't know what size nut goes on the threaded shaft, anyone know?
  15. Matt Barrack

    Chain attatched to centre sprocket?

    Ok so on my bike, the chain is connected from the gear on the engine, to the sprocket on the rear wheel. Recently, I've seen pictures of motorized bikes with the chain attached from the engine sprocket to the centre sprocket. Would this gearing result in better performance? I'm aware it looks...
  16. Matt Barrack

    Chain tensioner not working

    I just noticed this but my chain tightener/tensioner isn't on right. The tube it's on isn't shaped right so it doesn't fit on correctly. We positioned it so it doesn't jam but every now and then there is a loud pop coming from the chain. I believe it's because the chain is coming off the...
  17. kmarcetjr

    Started building the bike

    Well today I started the build, not much really, first I put puncture resistant tire liners in the tires, then I mounted my little collapsible basket on my handlebars, then I started on the actual build. I mounted the sprocket on the wheel as per the instructions sent with the kit. I said to...
  18. Rogue..

    68 spoke wheel?

    will the 9 bolt sprocket adaptor fit a 68 spoke wheel?
  19. I

    New Gear Sprocket

    I just order from BikeBerry a T 41 gear in hopes of getting a little more speed than the stock T 44 how much more speed should I anticipate my speed right now averages 20 MPH + or - 2 MPH?
  20. Txsandman

    Mag wheels compatibility Q

    Ok so I bought the bikeberry heavy duty mag wheel set, which comes with a sprocket. previously I was using 36 tooth performance bbr sprocket adapter. Question: is there a way to use bbr adapter and sprocket on my new mag wheelset?
Back
Top