exhaust

  1. 20210808_141814.mp4

    20210808_141814.mp4

    43 mph fly bye at 3/4 throttle
  2. snip

    Average exhaust port diam, port length, and port flange diam on the china girl engine

    I was wondering if yall could give me some specs for your china girls including port diameter port length port flange diameter also looking for your port timings and if you have the time the average exhaust temperature your exhaust is at on a ride why do I need all this? I'm making custom...
  3. Kitt

    Mz-65 issue?

    Hello everyone! I made a post asking what I should purchase or do for my build and there were many helpful suggestions. Thank you all who took the time to read that. But anyway, I purchased an Mz 65. When I first started it up, it ran fine but it started “backfiring” at the top end. As soon as...
  4. Avanti Powered

    Above Axle Exhaust...

    Hello all, New member here (owner of a 2001 Pacemaker II) I recently came across the following images of member RdKryton's Cruzzer with an exhaust pipe that runs above the rear axle (just like the old Whizzer's). It doesn't look like he has been active on the forum in a while so I was hoping...
  5. RB55

    Muffled but unrestricted exhaust idea

    Hello, Been searching forever for an easy way to upgrade the stock exhaust. Problem is that everyone here claims that the cheap banana exhausts off eBay are crazy loud and don’t really boost performance while the poo poo exhausts are quiet but don’t do anything. I know about the SBP and dirt...
  6. Clats97

    Shaving head, intake, exhaust

    Ok so I've shaved the head a bit and ended up increasing compression. I read somewhere that you can shave some of the exhaust port to increase top end performance? Is this true? If so how do I go about this. I've already dremeled the intake manifold so it's the exact same size as the port. It...
  7. D

    Exhaust system for 4-stroke

    I have a huasheng 49cc 4-stroke engine on my bike and it has the standard exhaust that comes with it. I would like to "Upgrade" or change it out for another better looking and better performing exhaust system. I want it to go all the way back to the middle of the rear wheel and have a better...
  8. herbilious

    Bike accelerating without using throttle

    Hi, I've got a relatively new (3rd tank of break-in) 66c motor that has a weird issue. I just installed a new expansion chamber banana exhaust because I broke the stock one, and something I've noticed is that once I start the motor and let out the clutch, the bike accelerates relatively fast...
  9. S

    Does anyone have experience with a wingsmoto exhaust?

    Link to product: https://www.amazon.ca/dp/B07LB548TR/ref=cm_sw_r_cp_apa_i_Cnm6CbZFCX20R I won't mind bending the exhaust a bit. The darn thing is real cheap, but I'm still sceptical.
  10. B

    Exhaust repercussions if any

    I was wondering if i put my exhaust from my 2 stroke on my 4 stroke what could i expect. I appreciate any advice i can get
  11. R

    Custom Exhaust help 49cc

    I am designing a motor limo bicycle 49cc I was thinking adding 2 exhaust together first the expansion tube exhaust in the front then piped down to a poo poo long pipe muffler going down the side. Was wondering would doing that hurt any performance or anything
  12. lukecanna

    KX65 Expansion Chamber or similar?

    Hi Everyone, Wanting to buy a expansion chamber for my bike as im still using the stock one with no baffle and holes drilled in it. What are your recommendations? I saw a post where someone said they put a kx65 econ there bike but they didnt give any info, i can weld btw so that isnt a problem...
  13. O

    Exhaust extension

    Hi guys! First post, so hello! I'm new into this scene and I purchased my first 80cc kit a few weeks ago. Installed onto a newer trek mountain bike, but ran into some issues. Frame is wider than the standard frame, so I had to fabricate a custom mount for it. No big deal, its sturdy and not...
  14. D

    Finding a nice expansion chamber in Australia

    Hi, I'm looking for an expansion chamber for my 49cc china kit. At the moment I have the eBay banana pipe but I'm looking for something more for a decent price available in Australia. Side note, I have done a few things to my bike and am in the process of doing more. I have done the; Banana...
  15. greenjon

    4-stroke mufflers and spark arrestors

    I'd like to know your experiences with mufflers and spark arrestors on 4-stroke bike engines. I'm not sure a muffler is required in my area, but the spark arrestor definitely is (it's practically all USNF here). Spark arrestor part numbers for Honda GXH50: 18350-ZM7-801 PCA-1151
  16. CrazyDan

    7/8" flex pipe for 4 strokes

    I found a cheap source for 7/8" galvanized flex pipe for exhaust sold by the foot...
  17. Kelster66

    Expansion pipe silencer.

    So I'm trying to come up with a good silencer for my Boost expansion pipe from Gasbike but not having any luck at all. Any suggestions or ideas?
  18. Matt Barrack

    Engine Trouble Multiple engine problems.

    I have come across a few problems. The bike currently runs fine but there are a few things that worry me. 1. The engine is spewing oil. It is coming out of at least 2 places. The first one I noticed is out of the exhaust gasket. It drips a little. The second and probably more serious part is it...
  19. B

    Engine Trouble Mr Smith

    First all hello. I'm a brand new motorized bike ower. I have a two-stroke mounted to my Trek frame. I have been fixed everything I can on it and have now tackled performance. I bought it used so I don't have any history on the bike other than what I have learned that was wrong with it after I...
  20. Matt Barrack

    Exhaust More leaks...

    I got a leak from the exhaust. Oil is coming out of the seem on the bottom. Or the top of the part that comes off when you unbolt it.
Back
Top