sideshowbob
Member
The critical component to install is a rectifier and voltage regulator I built one that is tiny and fits in a small tin box, it is 1"x2" circuit board. connect the neg to the frame ground and white wire to positive input. then connect outputs to a small battery, then on to switches and lights. This VR unit is variable from 0-30volts so you can set it to charge 6 or 12 volt lighting sysems (+1.5v over bat voltage). I may start selling these soon; if I do a kit would be abut $10, and a finished one for $20. + shipping. but you would still have to figure out a box or bag toput it and the battery in. I used a small tin box for under the seat with NIMH battery unit. I will post piccs soon (I'm waiting for a handlebar mounted MC switch unit before I can wire it all up. but here is a pic of the finished VR rectifier unit.