Hello, I just bought an 80 cc bike motor kit from ebay and I am having problems with the clutch. From what I learn from these forums, when the clutch arm is pulled, it pushes the clutch pin inwards. However, my pin won't go in any further. i tried pushing in by hand and it still doesn't even budge. Some manuals tell you that if you open the right side of the engine, and remove the small locking screw, and push the clutch pin in, the clutch adjust nut can be adjusted but when I push the clutch pin in, nothing on the right side moves either. When my chain is attached to the sprocket and wheel, it is very hard to pedal. Please tell me what is wrong with my clutch and how to fix it?
Thank you.
Thank you.