T
TWalker
Guest
I built another stretch cruiser with a 3 inch tire I've been working on this problem for 2 days and need help. To clear the tire I had to put spacers between the sprocket and wheel, I moved the axle over a bit to the left to spread the frame out to the left and make everything clear, everything looks and feels ok until I ride but everytime I ride it the insides of the hub loosen and the wheel starts wobbling like crazy.
It has been taken apart and reassembled numerous times in 2 days...I just dont get it. At this point I want to do away with the coaster brake as a new disc brake will be here in a few days.
The sprocket is slightly off center and I need to get it perfectly centered but it is extremely difficult and I could have to cut one spoke....could that be it?
1. I need a solution for the loosening in case I could still use the coaster brake.
2. How do I just make it work without the brake? I assume I just use a single speed freewheel?
There are pictures in my gallery that could help: https://motoredbikes.com/media/albums/mountain-motorbikes.27/
It has been taken apart and reassembled numerous times in 2 days...I just dont get it. At this point I want to do away with the coaster brake as a new disc brake will be here in a few days.
The sprocket is slightly off center and I need to get it perfectly centered but it is extremely difficult and I could have to cut one spoke....could that be it?
1. I need a solution for the loosening in case I could still use the coaster brake.
2. How do I just make it work without the brake? I assume I just use a single speed freewheel?
There are pictures in my gallery that could help: https://motoredbikes.com/media/albums/mountain-motorbikes.27/
Attachments
Last edited by a moderator: