tomtruty
New Member
See Dropbox images for HeliCoil conversion process. Cable bushing on Runtong carb is M6 x .75 threaded into plastic and can't easily be re-tapped to M6 x 1. Solution... Re-thread for M6 x 1 HeliCoil and use Cable bushing from original Carburetor. Didn't have to alter original Throttle cable allowing exchange to original carb any time. Also good if M6 x .75 thread is stripped like mine was!
https://www.dropbox.com/sh/5k5gx803gugbhna/AAB6F_7HLI-KGovOfrO2xO8Sa?dl=0