busted motor mount studs?
I've had a couple break on me, if they don't have loktite on em take a little hacksaw the cheapo 1handed jobber and cut a slot in the busted stud don't worry about cutting into the cases and try to keep it centered on the busted stud. Then put some liquid wrench or penetrating oil let it soak for a while and put yer lil flathead screwdriver in the slot and bear down on it and it should start backin out. Remember the width of scrwdrvr tip can't be bigger than the bolt diameter.and if you slip out of the slot just clean it up wit yer hacksw. I know it sounds okie but it works I've taken them out of friends bike, 1time with the motor still in bike with the chain on. I haven't had any luck with extractors on sml dia bolts. If you can't get it, drill and tap above it, and make the adjustment on mounting plate, if it's the rear you'll have to drill and tap 2 new holes so your bracket will work. If your not mechanically inclined find someone who is that's not gonna charge you more than the cost of a short motor!