Snowpoison
New Member
Ok so I just finished putting a 66cc engine on my bike. Everything was running perfectly. I rode like twice around the block and then let my brother have a turn. So he rode up the street and came back with his arm all cut up. Apparently he pulled the front break instead of the clutch and went over the handle bars. I don't know if that has anything to do with the engine not working because it was running fine after that. So I'm riding, I'm about two miles away from my house (after the accident I might add) and things are going good. Then I turn around to come back and nothing. The engine just died. It didn't sputter or anything, just shut off and wouldn't start back up again. So me and my brother decided we would try to figure it out. We put a inline spark checker on and got nothing. So we have it narrowed down to spark, but we swapped plugs, still nothing. We swapped coils, still nothing. So I guess it has to be something with the magneto, but after removing the cover we can't see anything wrong. No water (the engine hasn't even been near water) No obvious damage. The wiring has been checked and double checked and we can't find anything wrong with it. We're pretty much stumped and that's why I'm turning to a forum! Thanks in advance!