S
sideshowsideswipe
Guest
I ordered a new CDI and Magneto and switched out spark plugs.
Changed CDI twice and the magneto (what a pain in the butt) rechecked everything. I walked with the spark plug on the block to confirm good spark also with the spark out I can hear the piston going up and down and I can smell the gas in the chamber.
I took off the exhaust - air flows freely through the exhaust. the carb is fine I take the carb apart and put it back together each time.
When I release the clutch at about 6 miles an hour nothing happens. I can hear the chain struggling & rattling trying to make the piston move but nothing at all happens. Before the engine would at least turn over even if it wouldn't kick in and start.
Why would the piston go up and down with no spark plug inside but when the spark plug is in, it won't move???
Someone please help!
Changed CDI twice and the magneto (what a pain in the butt) rechecked everything. I walked with the spark plug on the block to confirm good spark also with the spark out I can hear the piston going up and down and I can smell the gas in the chamber.
I took off the exhaust - air flows freely through the exhaust. the carb is fine I take the carb apart and put it back together each time.
When I release the clutch at about 6 miles an hour nothing happens. I can hear the chain struggling & rattling trying to make the piston move but nothing at all happens. Before the engine would at least turn over even if it wouldn't kick in and start.
Why would the piston go up and down with no spark plug inside but when the spark plug is in, it won't move???
Someone please help!