+ Reply to Thread
Results 1 to 2 of 2
Thread: Spare tube size?
-
07-02-2011 #1
MBc Newbie
- Join Date
- Jun 2011
- Age
- 31
- Posts
- 14
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Rep Power
- 0
Spare tube size?
I was at the store today and saw two different spare tube sizes that should work, but I didn't want to get the wrong one.
I have 700x35c tires. The tube sizes I saw were 700x25-35c and 700x35-45c. It seems to me that both should fit. Is there really much of a difference for my use?
-
10-21-2011 #2
Go with the "wider" one. Think of a balloon. When it is not inflated much or stretched, it is harder to pop, but when it is stretched, a tiny poke will destroy it.
You can use 26" x 1.95 tubes in 700c x 35,38, 40 tires if you want thick tubes that are easier to patch if you do get a hole. You have to bead 1/4 of the tire and then stretch it a little. Not hard to do.
27 x 1 1/2 tubes will also work.
Here are "super tubes" in the correct size for about $5, try this.
http://www.niagaracycle.com/index.ph...er_id=&sort=3a
Sunlite Thorn Resistant Bicycle Tube 27 x 1-1/4 (700 x 30-35) SCHRADER Valve
$5.19Last edited by happycheapskate; 10-21-2011 at 11:54 PM.
Someone yelled at me while getting in their car, "ARE YOU TOO LAZY TO PEDAL?" I almost fell off the bike laughing at the irony.
Amerityre polyurethane bicycle tires:
Rob Slagle (S&S Tire/Affordable Turf Tires) in Phoenix AZ
602 721 2410
Similar Threads
-
Motor Sliding Down Seat Tube And Down Tube
By groove9028 in forum 2-Stroke EnginesReplies: 14Last Post: 09-20-2010, 09:53 AM -
SBP Shifter Kit Parts Question (setscrew size/keyway size)
By Skyliner70cc in forum Frame Mounted EnginesReplies: 6Last Post: 02-26-2009, 11:14 AM -
Anyone have a spare size 420 clutch?
By Me497 in forum Buy/Sell/TradeReplies: 2Last Post: 10-18-2008, 03:34 PM -
Carry a spare...
By Skyliner70cc in forum Frame Mounted EnginesReplies: 3Last Post: 03-02-2008, 05:33 AM -
Spare time.....
By in forum Off Topic DiscussionReplies: 7Last Post: 06-13-2007, 05:33 PM


Reply With Quote