+ Reply to Thread
Results 1 to 5 of 5
Thread: New project Rans Stratus XP
-
04-04-2011 #1
MBc Member
- Join Date
- Jul 2008
- Location
- Collierville, TN
- Posts
- 96
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Rep Power
- 5
New project Rans Stratus XP
Hey folks, I am in the process of purchasing a used Rans Stratus XP. I am going to mount a GEBE engine on it. Has anyone here done this before? Can anyone offer tips, especially concerning
mounting the engine
throttle location
working with disc brakes
Thanks for your help
David
-
04-19-2011 #2
MBc Member
- Join Date
- Jul 2008
- Location
- Collierville, TN
- Posts
- 96
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Rep Power
- 5
Anyone, Anyone?
-
09-13-2011 #3
How did your build turn out?? I am curious as to your rear tire size and you rim choice.
-
09-13-2011 #4
MBc Member
- Join Date
- Nov 2007
- Location
- Millington TN
- Age
- 62
- Posts
- 226
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Rep Power
- 6
Rans/gebe
Yo C Ville. I GEBE ed my RANS Veleocity Squared. Different than a Stratus but mounting the GEBE sould not be to different. I ordered the gebe laced up wheel . Don't recommend using the stock wheel with the quick release. You might have a problem with clearance with the disk brake. Any way the GEBE on a bent does really well BUT there are two drawbacks that led me to quit riding the bent/GEBE setup. 1st is --My head was way to close to the engine and the noise was too much for me[both stock muffler and the expansion chamber. 2cd---The exhaust fomes will get cha good. Seems like the wide seat and my back created a area for the exhaust fumes to circulate up and around my head. other than that the V2 was very fast .With the fairing the bikes speed was 40-45 no problem with the small 28cc tanaka. Hope this helps you
Cheers from Millington
-
09-13-2011 #5
MBc Member
- Join Date
- Jul 2008
- Location
- Collierville, TN
- Posts
- 96
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Rep Power
- 5
Got the GEBE all hooked up and running on the RANS Stratus. All I had to do was insert some washers to spread the fork and it worked great. I used the standard GEBE wheel with 10 guage spokes. It just BARELY clears the forks but works great.
It is a little bit louder but really not noticably so. And I don't smell any fumes at all. I am running the TLE-43. I LOVE the setup when cruising. The only thing I don't like has nothing to do with the engine setup. Getting started, especially up a hill is very challenging. If I am at an intersection, stopped, and need to get going. I know walk my bike across the street. Otherwise, you weave all over the road getting started to about 7 or 8 mph and look like an idiot. Plus, you can run into the car next to you. Like I said, this is the problem even without an engine mounted.
Similar Threads
-
[Recumbents] Rans Wave and
By rcoldtmr in forum Trikes & Recumbent Motorized BicyclesReplies: 0Last Post: 11-10-2010, 09:25 PM -
Rear Cargo Rack by Rans
By Hive in forum Parts, Accessories & ToolsReplies: 1Last Post: 09-04-2010, 03:02 AM -
[Recumbents] Rans Recumbent Update
By seabillco in forum Trikes & Recumbent Motorized BicyclesReplies: 5Last Post: 06-01-2010, 08:00 AM -
[Recumbents] Rans V2 Electrifide
By rearengine in forum Trikes & Recumbent Motorized BicyclesReplies: 2Last Post: 04-05-2009, 01:07 PM -
[Recumbents] Recumbent Rans formula V26
By benshushan in forum Trikes & Recumbent Motorized BicyclesReplies: 0Last Post: 06-11-2008, 11:44 PM


Reply With Quote
