james65
Active Member
- Local time
- 12:25 AM
- Joined
- Jul 9, 2009
- Messages
- 596
Frame
Actually there was no pre planing for the frame. I did mark the angle of the fork before cutting the frame. Next I bent the drop loop with a modified 3/4' EMT bender. Then just built around the drop loop. I was supprised when I went back an saw the date that I started this project. Still using it for a daily rider with a sidecar. Hope this helps a little let me know if I can help in any way.
Can u go into some detail on picture number two on how u figure the frame out,and we're to cut it.
Great build by the way!
Actually there was no pre planing for the frame. I did mark the angle of the fork before cutting the frame. Next I bent the drop loop with a modified 3/4' EMT bender. Then just built around the drop loop. I was supprised when I went back an saw the date that I started this project. Still using it for a daily rider with a sidecar. Hope this helps a little let me know if I can help in any way.