Hi im a noob here my name is cat I have a question regarding clutch noice (sqealing). I recently purchased a 80/66cc flying horse works good except for the god aweful noise. it makes. when i pull in the clutch lever all is good runs great rolling or idiling no problem there however when i let go of the clutch lever it squels obviously it is going to make some noise on take off but the noise continues as im up to speed...I looked on all the posts here regarding clutches and noise/adjustment..I have checked my rod an ball bearing on the chain sprocket side...have bothe tightend and loosend my flower/star nut..have taken off the nut and cleaned the break pads and clutch plate..i did not remove the clutch as i didnt have the tools too...still makes that noise ..i checked both covers no sign of rubbing on the case . The only think i noticed was the star nut was slightly askew when screwed in ..not sure if that could make the noise or not ...told the dealer they..(bikeberry) said that clutch noise was normal until break in period was done it would subside with time...doesnt sound right to me..any ideas..? thx