Al.Fisherman
Senior Member

Are you still making the clutch cable reroute kit?

Greetings Al, Thanks for your thread for Noobs. Found alot of useful info that only came from the School of Hard Knocks. I'm interested in one of your clutch reroute gizmos as well as a set of cylinder studs. The rest of the hardware I can obtain locally. By the way, I have a 68 (66?) cc skyhawk 2 stroke. Thanks again Sincerely, Jon (Ballentinesr@aol.com)

my friend is interested in the clutch bracket need shipping info

my goof al i mess read your parts dept. I will be talking to my friend about your clutch bracket he has a hard time pulling in the clutch lever on a new gt5 skyhawk motor. I would like to get one but I spend to much money on my sons graduation

sp454e
how do you calibrate to 49cc

What engine, what carburetor?

how do you calibrate to 49cc

al sorry to bother you for something so childish as this, but im being harrassed by cavi mike about tebowing the cop who pulled me over the day of the NATO summit. im doing 4 builds for people in the area and have all referd them to this forum but i do not want to it to hurt my buisness so if you could please squash this. thank you and sorry once again

The head (where the spark plug screws into) comes off after removing the (4) acorn nuts on top of the head (the 10mm or 14mm nuts).
http://s982.photobucket.com/albums/a...&current=3.jpg
http://s982.photobucket.com/albums/a...&current=4.jpg
Doubt any effect from ram air will occur. Tips on these Chinese 2 cycle engines.
https://docs.google.com/document/d/1...QUZq2qXXE/edit
Ron

hey brother you seem to know your stuff so i come in serch of knowledge. i read about taking down the head on these things, i never took one apart. do u have to take apart the bottom end to get the head off or can i pull it off from the top since u recomend putting on from the bottom. also would ram air give me loss of power even with a expansion chamber. thanks again brother

thanks Al. I read somewhere they blocked off one of those tubes.. Im going to give it my best to get this working right, even if it mean porting the jug...