duivendyk
Senior Member

I'm probably moving to lynchburg in a couple months how are the MB laws out there

Um depending on what 30cc ryobi you get the shafts change. If u get one like mine they dont have a big shaft they just got thread after the flywheel and usually an adaptor screwed on there where the shaft goes in for the weed wacker. I just unscrewed that off and screwed on my friction drive.

However, if you get a 31cc with a cent clutch and take the cent clutch off then u get a massive long shaft to play with. XD (that sounds a bit wrong) The output of them is fairly good, they got a lot of grunt in them. There pretty easy to come by and cheap (well in aus they are anyway). Im not sure what you want to do, wheather u want to put a sprocket on it or whatever but i think if u get the 30cc and unscrew the adaptor off and get a machine shop to make up an adaptor for the sprocket to fit on that would work well. Or u could do it redneck style and weld it on haha. That would also work since u could just take the adaptor piece thats already on there and weld the sprocket onto that and then screw it back on. That way it wouldnt bow the shaft in any way.

Well i hope that helps.
Brendon

Fear not my old friend, we'll spar with each other again or maybe just talk about running down the road with the wind in our faces. I would have said wind through our hair but alas mine has departed some time ago. Ride safe.

I got it
I do understand your thoughts
regarding MB max speeds
good thinking there
have a blessed day from MM

don't understand your posting in
Safe Speed For MB is ????
oh well - ride that thing Mountainman

Hi there, would you please be so kind as to check this thread and help me if you can?

http://www.motoredbikes.com/showthread.php?t=15250

It did quiet it down, but, I think there's more quiet to be had. I'm looking at a variant on it, (somewhat larger) and will report back when I get it built & tested.